FibReel Black fab HTPLA

Specification

Printing advice

1. Nozzle size = 0.4 mm (Standard to most printers & balances detail with productivity.)
2. Extrusion width = 0.45 mm (Typically larger than nozzle size. If using a larger nozzle diameter, be sure to set the extrusion width larger than that nozzle diameter.)
3. Layer thickness = 0.15 mm (For a balance of speed, quality & reliability.)
4. Speed(s) = 15-45 mm/s (Respecting mechanical and volume flow limits. Stay within the recommended speed range but apply slower speeds to the walls and faster speeds to the infill.)
5. Volume flow rate(s) = 1-3 cu mm/s (The result of above speed range, width, and layer thickness. Respect hardware and geometry limitations.)
6. Typical temperature = 215 C +/- 10 C (Matching material, hardware, and volume flow rate.)

ter-word; }

1. Nozzle size = 0.4 mm (Standard to most printers & balances detail with productivity.)
2. Extrusion width = 0.45 mm (Typically larger than nozzle size. If using a larger nozzle diameter, be sure to set the extrusion width larger than that nozzle diameter.)
3. Layer thickness = 0.15 mm (For a balance of speed, quality & reliability.)
4. Speed(s) = 15-45 mm/s (Respecting mechanical and volume flow limits. Stay within the recommended speed range but apply slower speeds to the walls and faster speeds to the infill.)
5. Volume flow rate(s) = 1-3 cu mm/s (The result of above speed range, width, and layer thickness. Respect hardware and geometry limitations.)
6. Typical temperature = 215 C +/- 10 C (Matching material, hardware, and volume flow rate.)

Applications

Technical Data Sheet

Material Safety Data Sheet

Density;	1.24 g/cc
Length:	346 m/kg (1.75) 130 m/kg (2.85)
Typical Printing Temp:	205-225 C
Glass Transition (Tg)*:	60 C
Peak Crystallization (Tc)**:	95-115 C
Onset to Melt (Tm)***:	155 C
Typical change when heat treated:	-2% x/y +1% z
Adviced 3d print speed<	40-50 mm/s
Advised Heated bed	50-60C
Cooling fan	Use the least amount of cooling for best layer-to-layer adhesion. For better overhang performance use 50-100% cooling

Density;	1.24 g/cc
Length:	346 m/kg (1.75) 130 m/kg (2.85)
Typical Printing Temp:	205-225 C
Glass Transition (Tg)*:	60 C
Peak Crystallization (Tc)**:	95-115 C
Onset to Melt (Tm)***:	155 C
Typical change when heat treated:	-2% x/y +1% z
Adviced 3d print speed<	40-50 mm/s
Advised Heated bed	50-60C
Cooling fan	Use the least amount of cooling for best layer-to-layer adhesion. For better overhang performance use 50-100% cooling

Coupon code will work on checkout page

fab HTPLA

Specification

Printing Advice

Applications

Specifications

Printing Advice

Applications

Technical Data Sheet

Material Safety Data Sheet

Specification

Printing advice

Applications

fab HTPLA

Specification

Printing Advice

Applications

Specifications

Printing Advice

Applications

Technical Data Sheet

Material Safety Data Sheet

Specification

Printing advice

Applications

Follow us