FibReel
Pink fab PLA
Pink fab PLA
₹ 49.00
-
₹ 1,399.00
FibReel
Choco Brown fab ABS
Choco Brown fab ABS
₹ 49.00
-
₹ 1,399.00
FibReel
Maroon fab ABS
Sale
FibReel
Maroon fab ABS
2
sold in last
8
hours
₹ 49.00
customers are viewing this product
FibReel fab ABS 3D Printing Filament (Acrylonitril-butadieen-styreen) is used a lot in 3D printing. The FibReel fab ABS 3D Printing Filament has significant properties that make it a great option, such as its strength and the fact that it is lightweight while it can handle many different chemicals as well. ABS material is also recyclable, which means that it is better for the environment than some other plastics by causing less waste. FibReel fab ABS 3D Printing Filament is very popular material thanks to its low cost and good mechanical properties. ABS is known for its toughness and impact resistance, allowing you to print durable parts that will hold up to extra usage and wear.
| Features | |
|---|---|
| Durability | High |
| Material costs | Low |
| Strength | High |
| Flexibility | Low |
| Resistance | |
| Heat resistance | High |
| Chemical resistance | High |
| Water resistance | Medium |
| General | |
| Density | 1.05g/cm3 |
| Heat Distortion Temperature (HDT) @1.82MPa | 85° C |
| Ultimate tensile strength (N/mm2) | 46.78 @100% Infill |
1) ABS has a higher melting temperature than PETG so we recommend setting your hot end temperature between 235 and 260°C.
2) ALWAYS OFF the fan with ABS as it tends to cool the filament in the hot end and and leads to poor layer adhesion.
3) When printing larger parts, consider adding an enclosure around your printer to maintain a higher temperature around your print
4) Set your bed temperature to 100 - 130°C .
5) The best surface for printing ABS plastic is a PEI build plate or using Kapton tape or ABS Slurry.
2) ALWAYS OFF the fan with ABS as it tends to cool the filament in the hot end and and leads to poor layer adhesion.
3) When printing larger parts, consider adding an enclosure around your printer to maintain a higher temperature around your print
4) Set your bed temperature to 100 - 130°C .
5) The best surface for printing ABS plastic is a PEI build plate or using Kapton tape or ABS Slurry.
ABS is used in a variety of ENGINEERING and FUNCTIONAL applications:
Concept modeling
Visual and functional prototyping
Manufacturing tools
Electronics.
Guards.
End use parts
Short run manufacturing
Automotive
Concept modeling
Visual and functional prototyping
Manufacturing tools
Electronics.
Guards.
End use parts
Short run manufacturing
Automotive
